Audio Setup Menu; Analogue Output; Digital Audio Setup - Philips DVP3026X User Manual

Audio Setup Menu

1
In disc mode, press SETUP.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.
- - Audio Setup Page - -
Analog Output

Digital Audio Setup

Pro Logic II
Sound Mode
Speaker Setup
Night Mode
Go to Audio Setup Page
Analog Output
This options allows you to set the stereo
analog output of your DVD player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Multi Channel
Select this to enable Multi-channel output.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-43_DVP3026_94_eng_RC2
DVD Setup Menu Options
Digital Audio Setup
The options included in Digital Audio
Setup are: 'Digital Output' and 'LPCM
Output'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful hint:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
29 30/06/06, 4:54 PM
29