Function Memory - Kaiser M 250 Series User Manual

FUNCTION MEMORY

The MEMORY function allows a range of frequently
used parameters (time and power) to be stored in the
memory. There are 3 independent memory cells, one
for each of the main functions: Microwave, Grill and
Hot air.
Memory storage procedure:
• Touch the key Memo, 1 to select memory mode.
Display 2 shows the corresponding display 3: JY-1,
JY-2, JY-3.
• Touch the key ОК, 4.
The symbols blink on display 2.
• Select a function: Microwave, Grill or Hot air
by touching an correspondent key (5/ 6/ 7).
• Set the desired operation parameters for the
selected function, follow the instructions of this
manual for: Microwave (page 30), Grill (page
35), Hot air (page 32).
• Select the following function and set the
operation parameters for it.
• Repeat the procedure for selection and setting
the functions parameter as many times as
necessary to set the cycle.
• For the final confirmation of the selected cycle,
press the key START, 8.
• If you intend to run the device immediately after
saving settings in memory, you must press the
key START, 8.
The device will start to operate.
EN
44