Electrical Connection - Kaiser M 250 Series User Manual

M 2510
OLAN-HAUSHALTSGERÄTE - Germany
1
220 – 240V/50 Hz 1350 W 25 Liter
800W @ 2450MHz 1000W

ELECTRICAL CONNECTION

Before connecting the microwave oven to the main
power supply, make sure that:
• The power cable does not come into contact with
any moisture or objects with sharp edges behind
the oven. High temperatures can also damage
the cable;
• The supply voltage corresponds to the
specifications on the rating plate 1 of the oven;
• The mains supply has an efficient ground
connection complying with all applicable laws
and regulations.
Correct grounding is a legal requirement. If the
appliance is not pre-fitted with a power cable and/ or
plug, use only suitable cables and plugs capable of
handling the power specified on the appliance's rating
plate and capable of resisting heat. The power cable
should never reach a temperature 50 °C above ambient
temperature at any point along its length.
If the appliance is to be connected directly to mains
terminals, fit a switch with minimum aperture of 3 mm
between the contacts. Make sure that the switch is of
sufficient capacity for the power specified on the
appliance's data plate, and compliant with applicable
regulations. The switch must not break the yellow-
green earth wire. The socket or switch must be easily
reachable with the oven fully installed.
Attention! Do not use the oven if the power cable
or the plug are damaged, if the oven does not
function correctly or if it has been damaged or
dropped. Contact the customer service.
Attention! This microwave oven is exclusively for
domestic use! Use the appliance only for preparing
meals.
EN
8