Precautions - Biotek PowerWave Operator's Manual

Precautions

The following precautions are provided to help avoid damage to the instrument:
Caution: Service
personnel. Only qualified technical personnel should perform troubleshooting and
service procedures on internal components.
Caution: Environmental Conditions
extremes. For proper operation, ambient temperatures should remain within the
range listed in the Specifications section of Chapter 1. Performance may be
adversely affected if temperatures fluctuate above or below this range. Storage
temperature limits are broader.
Caution: Sodium Hypochlorite
recommended diluted sodium hypochlorite solution (bleach) for more than 20
minutes. Prolonged contact may damage the instrument surfaces. Be certain to rinse
and thoroughly wipe all surfaces.
Caution: External Power Supply
instrument. Operate this power supply within the range of line voltages listed on it.
Caution: Carrier Shipping Bracket
must be removed before operating the instrument and reinstalled before
repackaging the instrument for shipment.
Caution: Disposal
with lead solder. Dispose of the instrument according to Directive 2002/96/EC, "on
waste electrical and electronic equipment (WEEE)" or local ordinances.
Caution: Warranty
the warranty. See Chapter 5 for preventive maintenance procedures.
Caution: Electromagnetic Environment
responsibility to ensure that a compatible electromagnetic environment for this
instrument is provided and maintained in order that the device will perform as
intended.
Caution: Electromagnetic Compatibility
proximity to sources of strong electromagnetic radiation (e.g., unshielded
intentional RF sources), because these may interfere with the proper operation.
PowerWave Operator's Manual
. The instrument should be serviced by BioTek authorized service
. Do not expose the system to temperature
. Do not expose any part of the instrument to the
. Only use the power supply shipped with the
. The microplate carrier shipping bracket
. This instrument contains printed circuit boards and wiring
. Failure to follow preventive maintenance protocols may void
. Per IEC 61326-2-6 it is the user's
. Do not use this device in close
11
Precautions |