Quality Control; Warranty And Product Registration; Repackaging And Shipping; Warnings - Biotek PowerWave Operator's Manual

Quality Control

It is considered good laboratory practice to run laboratory samples according to
instructions and specific recommendations included in the package insert or standard
laboratory protocol for the test to be conducted. Failure to conduct Quality Control checks
could result in erroneous test data.

Warranty and Product Registration

Review the Warranty information that shipped with your product. Register your
product(s) with BioTek to ensure that you receive important information and updates.
Contact the Customer Resource Center (CRC) at www.biotek.com or by calling 888/451-
5171 or 802/655-4740.

Repackaging and Shipping



Warnings

Operate the instrument on a level surface away from excessive humidity.
Strong light can reduce the linear performance range of the instrument.
Measurement values may be affected by extraneous particles (such as dust) in the
microplate wells. A clean work area is necessary to ensure accurate readings.
When operated in a safe environment according to the instructions in this
document, there are no known hazards associated with the instrument. However,
the operator should be aware of certain situations that could result in serious injury;
these may vary depending on the instrument model. See Hazards and Precautions.
PowerWave Operator's Manual
If you need to ship the instrument to BioTek for service or
repair, contact BioTek for a
number, and be sure to use the original packing
(RMA)
materials. Other forms of commercially available packaging are
not recommended and can void the warranty. If the original
packing materials have been damaged or lost, contact BioTek for
replacement packing.
Return Materials Authorization
9
Quality Control |