Sigma EF-630 Instructions Manual page 32

Caution!!
The [MODELING] Setting can not be selected in any flash mode
where the modeling flash is not available.
When the camera and flash are communicating, operation of the
TEST button is not available. (Pressing the camera's Depth-of-field
preview button emits the modeling flash regardless of the TEST
button allocation).
CUSTOM MODE (MENU 3)
It is possible to store and recall custom
settings. (Two series of custom settings
can be stored.)
STORING AND RECALLING
CUSTOM SETTINGS
1. Set the Flash mode, Mode details area, and Setup menu contents
as desired.
2. From [MENU 3] → [CUSTOM MODE SETTING], select [C1] or
[C2] and press the button.
3. Select [OK] and confirm with the
The registered contents are added to the Flash mode as the Custom
mode. (The Custom mode is indicated with the
in the Flash mode area.)
DELETING THE REGISTERED CUSTOM MODE
1. From [MENU 3] → [CUSTOM MODE DELETE], select [C1] or
[C2] and press the button.
2. Select [OK] and confirm with the
32
button.
or mark
button.
AF ASSIST LIGHT (MENU 4)
The AF assist light will turn on automatically as you focus on a
subject in a dark area. The effective range of the AF assist light is
from about 0.7 to 10 meters (2.3-29.5 feet).
When the AF assist light is not necessary, set [MENU 4] → [AF

ASSIST LIGHT] → [OFF].
LCD PANEL LIGHT (MENU 4)
When the power supply is turned to ON, the LCD panel lights up.
The ON/OFF settings of the light can be changed.
[MENU 4] → [LCD LIGHT]
After 8 seconds of non-operation, the light will turn
AUTO
off. When a button or dial is used while the light is
(Default)
off, the light will automatically turn on.
Regardless of whether a button or dial is being
8 SEC pressed, the light will turn off after 8 seconds from
when the light initially turned on.
ON The light is kept ON continuously.
Regardless of the setting, the light can be turned on/off with the

button.
LCD PANEL ADJUSTMENT (MENU 4)
The contrast and brightness of the LCD panel can be adjusted.
[MENU 4] → [DISPLAY SETTING]