Calibration And Maintenance; Calibration Procedures - Hunter GSP9200 Series Operation Instructions Manual

6. Calibration and Maintenance

6.1 Calibration Procedures

The "Calibration" primary screen can be selected by pressing "Calibrate" from the
"Logo" screen. The "Calibration Procedures" primary screen contains a list box of
calibration procedures. As the procedures are individually highlighted by selecting
"n" or "p", the equipment components to be calibrated for each procedure are shown
in yellow on the illustrated GSP9200.
Calibration can be performed on the Balancer, the Inner Dataset Arm, and the Outer
Dataset Arm.
Begin calibration procedures by selecting "Begin Procedure." When finished
calibrating, select "Exit."
Throughout the calibration procedures, "Back Up" can be selected to return to the
previous step.
The calibration weight used for calibrating the balancer and the inner dataset arm is
stored in one of the weld nuts located on the back of the base assembly or in the
weight tray.
®
Dataset arm require the optional calibration tool, 221-672-1.
6. Calibration and Maintenance x 61
GSP9200 Series Wheel Balancer Operation Instructions