Mariner 30 JET 40 (4 CYL) Service Manual page 74

FULL THROTTLE STOP SCREW ADJUSTMENT
(OUTBOARD NOT RUNNING)
1. Advance throttle lever to hold full throttle stop
screw against stop.
a - Full Throttle Stop Screw
b - Stop
2C-4 - ELECTRICAL AND IGNITION
a
b
54665
2. Adjust full throttle stop screw to allow full carbure-
tor shutter opening at wide-open-throttle. Throttle
shutters MUST NOT act as a throttle stop. .010"
- .015" (0.254mm - 0.381mm) free play should
exist between secondary pick up screw and car-
buretor cluster secondary lever. If sufficient free
play does not exist, full throttle stop screw MUST
BE adjusted.
b
a - Secondary Pick Up Screw
b - Carburetor Cluster Secondary Lever
c - .010 in. - .015 in. (0.254mm - 0.381mm) Clearance
90-814676R1 DECEMBER 1996
a
c
54664