14. Remove three bolts securing flywheel cover to
powerhead and remove cover and oil tank
assembly.
NOTE: Hold oil tank securely when removing from
powerhead as oil tank may detach from flywheel
cover assembly.
a
a
a - Bolts
b - Flywheel Cover
15. Remove four bolts securing trim cover to bottom
cowl and remove cover.
a
b
a - Bolts (2 Each Side)
b - Trim Cover
90-814676R1 DECEMBER 1996
16. Remove eight nuts securing powerhead to drive-
b
a - Nuts (4 Each Side)
a
17. Remove plastic cap from center of flywheel and
54640
a - Lifting Eye (91-75132)
54671
shaft housing.
a
thread Lifting Eye (91-75132) into flywheel. Us-
ing hoist, lift powerhead from driveshaft housing
and install on Powerhead Stand (91-25821A1) or
work bench.
a
54672
54673
POWERHEAD - 4-13