Mariner 30 JET 40 (4 CYL) Service Manual page 343

4. Apply 2-4-C Marine Lubricant (92-90018A12) to
lower pivot pin. Using a suitable punch, drive low-
er pivot pin into clamp bracket and trim cylinder
assembly until pivot pin is flush with outside sur-
face.
a - Lower Pivot Pin
5. Using a suitable punch, drive lower dowel pin into
its hole until seated.
a - Lower Dowel Pin
5E-44 - MID-SECTION
a
51147
a
51148
6. Apply 2-4-C Marine Lubricant (92-90018A12) to
surface of upper pivot pin, pivot pin bore and trim
ram bore.
a
b
a - Pivot Pin
b - Pivot Pin Bore
c - Trim Ram Bore
7. Using a suitable mallet, drive upper pivot pin into
swivel bracket and through trim ram until pivot pin
is flush with swivel bracket.
a
a - Pivot Pin
b - Swivel Bracket
c - Trim Ram
90-814676R1 DECEMBER 1996
c
51148
b
c
51148