Mariner 30 JET 40 (4 CYL) Service Manual page 148

11. Remove crankshaft assembly from cylinder
block. If pry bar is used to aid in removal of crank-
shaft assembly, pad surface of block where pry
bar contacts.
c
a
a - Crankshaft Assembly
b - Pry Bar
c - Pad
90-814676R1 DECEMBER 1996
b
c
54690
12. Remove 6 screws securing transfer cover to cyl-
inder block and remove cover.
13. Remove balance tube and fittings from cylinder
block.
14. Remove bleed hose and bleed check valve from
cylinder block.
15. Remove tell-tale hose and fitting from cylinder
block.
NOTE: Manual Start Models and some early Electric
Start Models have fuel enrichment fitting in the bal-
ance tube.
b
a
a - Screws
b - Transfer Cover
c - Balance Tube
d - Bleed Hose
e - Bleed Check Valve
f - T-Fitting (Fuel Enrichment)
d
f
c
e
54691
POWERHEAD - 4-19