Connections; Connect The Power Amplifier And The Vxs3S; Set The Line Voltage/Impedance And Power - Yamaha VXS3SB Owner's Manual

Connections

Connect the power amplifier and the VXS3S

Connect the OUTPUT of the power amplifier to the INPUT of the
subwoofer.
Power amplifier
INPUT
＋
－
6
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
INPUT

Set the line voltage/impedance and power

Select the line voltage/impedance (100V/70V/8Ω) and power tap for
100V/70V line distributed system by rotating the tap selector switch on
the front side of the speaker with a flat-blade screwdriver.
NOTICE
• When connecting speakers with high impedence, select settings according to the
above selector switch inscriptions according to the number of satelite speaker
connections (NONE/×2/×4) and output (W).
Make sure that the input total of each speaker does not exceed the rated output of the
power amplifier.
• Do not set the tap selector switch to the "X" position.
• When using a low impedance connection, set the tap selector switch to the "8Ω"
position.
If the setting is incorrect, it may cause malfunction of the speaker and amplifier.
• Make sure the amplifier is switched off before operating the tap selector switch.
Satellite speakers (NONE)
Satellite speakers (×4)
Satellite speakers (×2)