Wired Network Connections; Wireless Network Connections - Yamaha YAS-209BL Owner's Manual

Wired network connections

To use a wired network connection, connect the unit to a router via an
STP ethernet cable (CAT-5 or higher straight cable).
Internet
WAN
LAN
Modem
Router
Mobile device
STP ethernet cable
(sold separately)
NETWORK jack

Wireless network connections

Connect the unit to a wireless router (access point) to use a network.
See the following for instructions on connecting to a wireless router
(access point).
• "Connecting to a network with the Sound Bar Controller app" (p.22)
Internet
Modem
Mobile device
n NOTE
• If the unit and the wireless router (access point) are too far apart, the unit may not
connect to a wireless router (access point). In such case, place them close to each
other.
• This unit operates only in the 2.4-GHz band. Connect your mobile device to the
network using the 2.4-GHz band and then configure the unit's settings for a wireless
connection.
21
En
Wireless router
(access point)