Wired Network Connections; Wireless Network Connections - Yamaha MusicCast Bar 40 Owner's Manual

Wired network connections

To use a wired network connection, connect the unit to a router via
an STP network cable (category 5 or higher straight cable; sold
separately).
Internet
WAN
LAN
Modem
Router
Mobile device
NOTE
If network connections or settings are changed, use the MusicCast CONTROLLER
app to connect the unit to a network and register the unit as a MusicCast-enabled
device again (p.22).
Network Attached Storage
(NAS)
Computer
Network cable

Wireless network connections

Connect the unit to a wireless router (access point) to use a
network.
See the following for instructions on connecting to a wireless router
(access point).
• "Connecting with the MusicCast CONTROLLER app (registering
the unit as a MusicCast-enabled device)" (p.22)
• "Connecting to a network using the WAC function" (p.48)
Internet
Modem
Mobile device
The * indicator on the unit glows when the unit is connected to a
wireless network.
NOTE
If the unit and the wireless router (access point) are too far apart, the unit may not
connect to a wireless router (access point). In such case, place them close to each
other.
21
En
Wireless router (access point)
Glows