soundsation GO-SOUND AMW series User Manual page 8

ENGLISH
See the pictures below that show the internal wiring of these cables. Be sure to use
only high quality cables.
Use commercial RCA cables to wire stereo unbalanced sources with RCA output con-
nectors to stereo RCA Line inputs of GO-SOUND AMW units.
You can, of course, also connect balanced equipment to unbalanced inputs. Use either
mono and stereo jack, making sure ring and collar are connected together (or pins 1 &
3 in the case of XLR connectors).
8
GO-SOUND AMW series User manual
Unbalanced use of 1/4" jack TS connector
Strain relief
clamp
Sleeve
Tip
Balanced use of 1/4" jack TRS connector
Headphones connection with 1/4" TRS connector
Strain relief
clamp
Sleeve
Ring
Tip
Tip
Sleeve
Signal
Ground shield
Sleeve
Tip
Ground shield
Hot (+ Ve)
Ring
Cold (- Ve)