soundsation GO-SOUND AMW series User Manual page 11

GO-SOUND AMW series User manual
denser type if it has its own battery power.
7) LINE In
There is a stereo RCA that accept unbalanced line-level signals.
8) MIC LEVEL
This controls the overall signal level at MIC IN1 and MIC IN2 inputs.
9) Line Level
This controls the Line overall signal level at the RCA inputs.
10) ECHO
It adjust the Echo level on MIC IN 1 and 2 and to VHF MIC1 e 2. It has no effect on
LINE input and MP3 player.
11) Digital MEDIA player
This panel controls all functions related to the multi-player and hosts the Bluetooth™
receiver as well as USB and SD-Card slots. For further information about how to use it,
see "4.2. Digital Media Player Control Panel" on page 12.
12) Bluetooth/MP3 LEVEL
This controls the overall signal level of the MP3/Bluetooth™ player.
13) Master LEVEL
This controls the overall level of the speaker.
NOTE: It doesn't affect the MIX OUT level.
14) MIX Out
It is a stereo RCA output with unbalanced line-level signals. It contains the mix of all
inputs and all controls. It can be used for recording purposes or simply to connect the
GO-SOUND AMW PA system to a mixer o any other audio system. This output is not
controlled by MASTER LEVEL.
15) POWER and CLIP LED
When line-cord is connected to the AC Mains connector and POWER switch is turned
on, the POWER indicator is lit.
CLIP LED lights up only when the input signals are too high and limiter operates in
order to prevent unwanted damage to amplifier or transducers.
NOTE: To better adjust levels and avoid limiter to intervene and cut signals,
ENGLISH
11