Using The Built-In Annotation Mode; Built-In Tools For Use Without A Computer - Epson BrightLink 675Wi+ User Manual

Selecting a Networked Device Source
Splitting the Screen
Using Interactive Features with Two Projectors
Parent topic:
DCMS/Publications/Projectors/Source/Interactive/Tasks/pen_finger_using_built_in_toolbar_bl595wi_plus.xml

Using the Built-in Annotation Mode

You can use either pen with the built-in toolbar, both pens at the same time, your finger (BrightLink
695Wi+), or a combination of both pen and finger touch (BrightLink 695Wi+).
1. Select the source for the image you want to annotate. If you simply want to use a blank screen,
select any unused source.
2. To activate the toolbar, tap the projection surface with the pen or your finger (BrightLink 695Wi+).
You see
Note: The toolbar arrows disappear if you do not use them. To make them reappear, tap the
projection surface with the pen or your finger (BrightLink 695Wi+).
3. To display the toolbar, select one of the
Note: You can use the pen or your finger (BrightLink 695Wi+) to move the arrows up or down.
4. To close the toolbar, select the
Note: If you want to hide the toolbar automatically after drawing, select the
toolbar.
Parent topic:
DCMS/Publications/Projectors/Source/Interactive/Reference/pen_annotation_tools_bl695wi_bl696ui_table.xml

Built-in Tools for Use Without a Computer

The built-in toolbar is embedded in the projector and allows you to draw and write on the projected
screen.
Using the Interactive Features
arrow icons on the left and right side of the projected image.
icon at the bottom of the toolbar.
Using BrightLink Without a Computer
arrows.
189
icon at the bottom of the