5. Select Yes and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic:
Related tasks
Replacing the Lamp
DCMS/Publications/Projectors/Source/Maintenance/Tasks/replacing_remote_batteries_typeab.xml
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Remove the battery cover as shown.
/DCMS/Publications/Projectors/Source/Images/Setup/battery_cover_open_typeab.jpg
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
Projector Lamp Maintenance
253