Epson PowerLite 670 Quick Setup

PowerLite 670/675W/680/685W
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Before you can connect to the projector, you need to remove the screws and
the cable cover.
Computer
Choose from the following connections. See the sections below or the online
User's Guide for details.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows ® Vista or later: After turning on the projector, follow
the on-screen instructions to install the Epson
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer or Computer, then double-click
EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector's Computer1 or Computer2
port, and the other end to your computer's
a laptop, switch it to external display (see "Troubleshooting"). You can also
connect an audio cable.
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
External monitor and speakers
You can connect an external monitor and external speakers to your projector
to enhance your presentations. See the online User's Guide for details.
VGA cable
USB cable
HDMI cable
® USB Display software
monitor port. If you are using

Wired network

Connect the projector to your network using an Ethernet cable. See "Project over
a network" for more information.
Note: To connect the projector to a wireless network, you must install the
optional Epson Wireless LAN Module (ELPAP10). To purchase the Epson
Wireless LAN Module or other accessories, see "Optional accessories." For more
information, see the online User's Guide.
Microphone
Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video device

Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User's Guide.
Component video
to VGA cable
Audio cable
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI 1/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
RCA video cable
(composite video)
HDMI cable
MHL cable