Table of Contents
Advertisement
3. Select Auto Calibration and press Enter.
/DCMS/Publications/Projectors/Source/Images/Menus/PL470_BL485wi/calibration_auto_bl475wi_485wi.j
pg
4. Adjust the image focus, if necessary.
5. Press Enter to select Yes.
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:
Related tasks
Calibrating Manually
Focusing the Image
DCMS/Publications/Projectors/Source/Interactive/Tasks/pen_calibrating_manual_bl575wi_595wi.xml
Calibrating Manually
If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Pen Calibration
169
Advertisement
Table of Contents
