Selecting Password Security Types - Epson BrightLink 675Wi+ User Manual

The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press Esc to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
DCMS/Publications/Projectors/Source/Adjustments/Tasks/security_selecting_password_type_network.xml

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the password security types you want
to use.
/DCMS/Publications/Projectors/Source/Images/Menus/PL585W_BL595Wi_Plus/password_protection_pl585w
_bl595wi.jpg
If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or
until the menu appears.
1. To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On,
press Enter again, and press Esc.
2. To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protection, press Enter, select On, press Enter again, and press Esc.
3. To prevent changes to network settings, select Network Protection, press Enter, select On, press
Enter again, and press Esc.
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Password Security Types
142