Dcn-Wap Wireless Access Point; Introduction; Firmware; Controls, Connectors And Indicators - Bosch DCN Installation And User Instructions Manual

DCN Wireless | Installation and User Instructions | Central Devices
11 DCN-WAP Wireless
Access Point
11. 1

Introduction

The wireless access point:
• Sends signals from the central control unit to the
wireless devices.
• Receives signals from the wireless devices and sends
them to the central control unit.
11.2

Firmware

The version numbers of the software of the wireless
access point (refer to 10.6.7) and the central control unit
(refer to 10.6.6) must be the same.
Note
Use the Download and License Tool to send
new software to the wireless access point.
Bosch Security Systems | 2007-11 | 9922 141 70691 en
11.3 Controls, connectors and
indicators
The wireless access point contains:
1 Status LEDs - Give information about the
condition of the wireless network and the wireless
access point (refer to 11.7).
2 Optical network sockets - Connect the wireless
access point to the optical network (refer to 11.5.1).
figure 11. 1 : Top and bottom views
en | 54
1
2