Bosch DCN Installation And User Instructions Manual page 53

DCN Wireless | Installation and User Instructions | Central Devices
10.6.12 De-init
Use the 4L De-initialize menu item in the 4L De-Init
sub-menu to erase the addresses of the contribution
devices and the interpretation devices (refer to table
10.30 and 12.2).
table 10.30: De-init sub-menu (* = default)
Menu item
4L De-init
10.6.13 Defaults
Use the 4N Defaults sub-menu to set all parameters to
the default values in the configuration menu (refer to
table 10.31). This includes the values of the parameters
of the interpreter desks. These parameters are not
changed:
• The subscription list of wireless devices
• The name of the central control unit
table 10.31: Defaults sub-menu (* = default)
Menu item
4N Defaults
10.6.14 Delegate Display
Use the 4O menu to select a language that is used on the
display of a wired contribution device (refer to table
10.32).
table 10.32: Delegate display sub-menu
4O Del. Display
Bosch Security Systems | 2007-11 | 9922 141 70691 en
Parameter
De-initialize
Parameter
Reset to defaults?
--- Language:
English*
German
French
Italian
Dutch
Spanish
Value
None*
Wired
Wireless
Value
No*
Yes
The language that is used by the displays of
the contribution devices. Other languages
(e.g. Chinese) can be downloaded to the
CCU, but will overwrite the default
languages. The English language cannot be
overwritten.
en | 53
Description
Does not erase the
addresses.
Erases the addresses of
the wired devices in the
DCN.
Erases the subscription
list of the devices in the
wireless network.
Description
Does not put back the
default values.
Sets all parameters to the
default values.