Bosch DCN Installation And User Instructions Manual page 48

DCN Wireless | Installation and User Instructions | Central Devices
10.6.5 Monitoring
Use the 2 Monitoring menu item to open the Monitoring
sub-menu (refer to table 10.22).
table 10.22: Monitoring sub-menu (* = default)
Menu item
2A Source/Volume
10.6.6 DCN-WCCU Enquiry
Use the 3A CCU menu item to open the CCU
sub-menu. The menu items in this sub-menu give
general data about the central control unit (refer to table
10.23).
Note
This data must be mentioned in all service
requests and failure reports.
table 10.23: DCN-WCCU Enquiry sub-menu (* = default)
Menu item
3Aa Serial Nr
3Ab HW Version
3Ac FPGA Version
3Ad SW Version
3Ae FW Version
Bosch Security Systems | 2007-11 | 9922 141 70691 en
Parameter
Signal:
Floor
Input 1
Input 2
Output 1
Output 2
Parameter
---
---
---
---
---
Value
Volume level:
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
-31 to 0 dB (16 dB*)
Value (read-only)
e.g. 20.0.00362
e.g. 3.0
e.g. 1.06
MM.mm.bbbb
e.g. 2.20. 1 234
MM.mm.bbbb
e.g. 4.00. 1 234
en | 48
Description
The signal that is available
on the headphones
socket of the central
control unit and its volume
level.
Description
The hexadecimal serial
number of the central
control unit.
The version number of the
hardware of the central
control unit.
The version number of the
FPGA firmware of the
central control unit.
The version number of the
software of the central
control unit.
• MM: Major release no.
• mm: Minor release no.
• bbbb: build no.
The version number of the
firmware of the central
control unit.
• MM: Major release no.
• mm: Minor release no.
• bbbb: build no.