External Connections; Configuration - Bosch DCN Installation And User Instructions Manual

DCN Wireless | Installation and User Instructions | Central Devices
11.5

External connections

11.5.1 Optical network
Connect the optical network sockets of the wireless
access point to the optical network with optical network
cables (refer to figure 11.5).
figure 11.5: Optical network
table 11.2: Optical network connections
Number of connections:
2x proprietary sockets
Location:
Bottom side
Nodes:
1
Power consumption
4 W
Bosch Security Systems | 2007-11 | 9922 141 70691 en
11.6

Configuration

11.6.1 Introduction
Use the configuration menu of the central control unit to
configure the wireless access point.
11.6.2 System ID
Note
Set the correct system identity before you do
the installation of the system (refer to section
12.2.2). When you change the system identity
after you did the initialization, you must do the
initialization again.
Set the system identity with the 4Kb System ID menu
item. Adjacent systems must have different system
identities (refer to figure 11.6) and different carriers
(refer to figure 11.7)
figure 11.6: System IDs for adjacent systems
en | 57