Operation - Bosch DCN Installation And User Instructions Manual

DCN Wireless | Installation and User Instructions | Contribution Devices
17.4.2 Loop-through socket
With the loop-through socket, you can connect battery
chargers in series.
• If the power supply is 100 - 127 V(AC), 50 - 60 Hz,
you can connect a maximum of 5 battery chargers in
series.
• If the power supply is 220 - 240 V(AC), 50 - 60 Hz,
you can connect a maximum of 10 battery chargers
in series.
figure 17.6: Loop-through socket
17.5

Operation

The higher the capacity, the higher the number of
charge level LEDs that come on (refer to table 16.4).
Note
The accuracy of the battery capacity in table
16.4 is plus or minus 20%.
table 17.2: Charge level LEDs
No. LEDs on
5
4
3
2
1
Bosch Security Systems | 2007-11 | 9922 141 70691 en
Battery capacity (hours)
18 - 20
13 - 18
8 - 13
3 - 8
< 3
en | 92