Installing A Flex Slot Power Supply - HP apollo 4510 gen9 Setup And Installation Manual

Prepare the low-profile LFF hot-plug drive for installation.
2.
Install the LFF hot-plug drive in the chassis.
3.
Determine the status of the drives using the drive LEDs located on the storage display LEDs (on
4.
page 9).
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/smartstorage/docs).

Installing a flex slot power supply

WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the server.
Installing the chassis 30