HP apollo 4510 gen9 Setup And Installation Manual page 26

the rack with each subsequent chassis. Plan the rack installation carefully because it is difficult to change
the location of components after they are installed.
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The rack is bolted to the floor using the concrete anchor kit.
• The leveling feet extend to the floor.
• The full weight of the rack rests on the leveling feet.
• The racks are coupled together in multiple rack installations.
• Only one component is extended at a time. If more than one component is extended, a rack
might become unstable.
WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before installing the chassis.
To install the chassis:
WARNING: To reduce the risk of personal injury or damage to the equipment, you must fully
extend the rails. To fully extend the rails, press the push tabs and extend the rails until the rails
click twice.
Extend the rails until they stop.
1.
Installing the chassis 26