Installing The Chassis; Installation Overview; Disassembling The Chassis - HP apollo 4510 gen9 Setup And Installation Manual

Installing the chassis

Installation overview

To set up and install the chassis:
Set up and install the rack. For more information, see the documentation that ships with the rack.
1.
Disassemble the chassis
2.
Install the chassis into the rack (on page 25).
3.
Install the system components into the chassis (on page 28).
4.

Disassembling the chassis

Before installing the chassis into the rack, you must remove the pluggable modules and system
components from the chassis. Because a fully populated chassis can weigh up to 99.79 kg (220.00 lb),
remove the components from the chassis to make moving and installing the chassis easier.
With the chassis still on the pallet, remove all components from the front and rear of the chassis.
1.
Power supplies
o
("Disassembling the chassis" on page 21).
Installing the chassis 21