To Change Parameters In The Current Program Step - Electrolux W475S Operating Manual

16

To change parameters in the current program step

991 NORMAL 95°C
PROGRAM STEP: MAIN WASH
STEP TIME: 720 SEC
SET TEMPERATURE:
ACTUAL TEMPERATURE:
REMAINING TIME:
DRUM SPEED: 1000 RPM
RAPID ADVANCE
SHOW WEIGHT
SELECT
3584
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH
STEP TIME: 720 SEC
SET TEMPERATURE:
ACTUAL TEMPERATURE:
REMAINING TIME:
DRUM SPEED: 1000 RPM
RAPID ADVANDE
SHOW WEIGHT
SELECT
SELECT
SELECT
Procedure for use
During program operation the
1
display will look like this (see
85 C
section "To start the wash
21 C
70 MIN
program").
Press c one or more
times...
1
...to highlight the line re-
85 C
quired.
21 C
70 MIN
Press SELECT.
Use the numeric keys to
enter the new parameter .
Press SELECT.
You can alter the following program steps:
Prewash, Main wash, Rinse, Drain, Soak
Length of program step (max. 9998 seconds),
heating temperature (max. 97°C).
Extraction
Length of program step (max. 3599 seconds),
extraction speed.
If you have entered the wrong parameter
Continue pressing numeric keys to overstrike the
incorrect parameter.
Note: always use the same number of digits as
used on the display to overstrike the incorrect
parameter.
Example:
To change the time for the program step to 30 se-
conds, enter 030 to overstrike the earlier parameter.