Electrolux W4130S Specification

Features and benefits
• Frequency-controlled motor with fixed wash and extraction speeds ensures
smooth action in the wash and extraction sequence
• Good dewatering ability due to higher G-force compared with a
traditional solid mount machine
• Solid mount construction with robust frame in galvanized steel
• Available with two types of program controls:
®
Compass Control with:
– Large display and one dial for easy program selection
– Language selection
– Two Quick Start buttons for frequently used wash programs
– Wash program packages optimized on Economy, Performance and Time
®
Clarus Control with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• AWS – Automatic Weighing System:
– The machine weighs the linen and adjusts the amount of water
and energy according to the load. This leads to considerable
savings in case the machine is not fully loaded
• Extremely low water and energy consumption – see table below
• Four compartment soap box for manual dosing of powder or liquid
detergent
• Large door opening for easy loading/unloading
• Stainless and galvanized steel in all vital parts for high degree of rust
protection
• SuperBalance guarantees the correct extraction force
TM
Main options
• Automatic liquid detergent supply (optional I/O board for Compass Control)
• Stainless steel front panel
• Stainless steel side panel (only with Clarus Control)
Main specifications
Max. capacity
Drum, volume
diameter
Extraction
G-factor
Heating alternatives electricity
steam
non-heated
Consumption data "WARM" * (3S03)
Total time
Water consumption (cold+hot)
Energy consumption (motor)
* Water temperature 59°F cold water and 149°F hot water.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D. Certified in accordance with UL/ETL standards.
Washer extractors
kg/lb
litre/ft
3
ø mm/inch
rpm
kW
min
litre/gallon
kWh
PROFESSIONAL LAUNDRY
W4130S, W4180S
Compass Control
Clarus Control
W4130S
14/30
130/4.6
595 / 23 7/16
776
200
7.5/9.7
x
x
34
165+9 / 43.5+2.4
0.1
W4180S
20/45
180/6.4
650 / 25 9/16
742
200
12.7
x
x
34
237+11 / 62.6+2.9
0.15