SCALE ADJUSTMENTS
CALIBRATE THE SCALE
DONE! PRESS SELECT
SELECT
3588
SELECT
SCALE ADJUSTMENTS
CALIBRATE THE SCALE
RESET SCALE FROM CALIBRATION
MODE AND PRESS SELECT
SELECT
3588
SELECT
Procedure for use
For machines with weighing equipment installed only!
Press SELECT.
Restore the calibra-
tion switch to normal
mode.
Press SELECT.
Calibration mode/normal mode
To gain access to the calibration switch in the sca-
le unit, the top panel has to be taken off. Remove
the four screws on the scale unit cover. Then the
calibration switch can be switched between nor-
mal mode "ON" and calibration mode "CAL".
ON (normal)
CAL (calibration)
Calibration
switch
51
Scale unit
4758 A