Electrolux W475S Operating Manual page 12

12
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH
STEP TIME: 720 SEC
SET TEMPERATURE:
ACTUAL TEMPERATURE:
REMAINING TIME:
DRUM SPEED: 1000 RPM
RAPID ADVANCE
SHOW WEIGHT
SELECT
3583
RAPID ADVANCE
SHOW WEIGHT
NO WATER REDUCTION
MANUAL FUNCTIONS
PAUSE
TEXT
SELECT NEW WASH PROGRAM
AUTO RESTARTS
CHANGE °F/°C
SELECT
Additional functions during the program
Rapid advance (see section "Rapid advance")
Rapid advance through the program to the program
step required. Rapid advance can be used to move
both forwards and backwards through the program.
Show weight (see section "Show weight")
The actual load weight is shown in large digits on the
display (weight display mode). (On machines with
weighing equipment only.)
No water reduction (see section "No water
reduction")
Machines with weighing equipment installed adjust
the water level automatically according to the load
weight. This function lets you switch off water level
reduction during the current program.
Manual functions (see section "Manual functions")
The following functions can be controlled manually
during the course of the program:
- all water valves, drain and pumps
(where applicable).
- limit highest extraction speed.
- motor on/off after end of wash program.
- flush detergent.
Procedure for use
The following information is
displayed during the wash
program:
Current program step
Time left for this program step
Set temperature
1
Actual temperature
85 C
21 C
70 MIN
Remaining program time
Drum speed
If required:
Select a function using the
cursor keys.
Press SELECT.
To terminate a program before it has finished
• Select RAPID ADVANCE and press SELECT.
Advance to "END OF PROGRAM" and press
SELECT.
• Wait until "THE DOOR IS OPEN" appears on the
display.
• Now the door can be opened.
To change parameters in the current program
step
See section "To change parameters in the cur-
rent program step".
Certain program step parameters can be altered
during the course of the program. In the example
(left), the length of the program step and the heating
temperature can be altered.
Pause (see section "Pause")
The machine stops. The drain valve remains clo-
sed.
Another way to pause the program: Press a.
Text (see section "Text")
Display description of wash program (if available).
Select new wash program (see section
"Select new wash program")
You can switch to using a different wash program
at any stage during the wash. Once this function
has been selected, the current step (for example,
rinse) of the earlier program will be allowed to
finish and then the new program will start (from
the beginning).
Auto restarts (see section "Auto restarts")
Here you enter the number of times you wish the
wash program to restart automatically.
Change °F/°C (see section "Change °F/°C")