Engaging The Rotor Blades; Disengaging The Rotor Blades; Shutting Off The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro Power Clear 721 QZE Operator's Manual

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar against the
handle (Figure 19).
Figure 19
1. Control bar

Disengaging the Rotor Blades

To disengage the rotor blades, release the control bar
20).
Figure 20

Shutting Off the Engine

To shut off the engine, turn the ignition key counterclockwise
to the O position (Figure
FF
(Figure
21).
Adjusting the Discharge Chute
and Chute Deflector
To adjust the discharge chute, press the trigger of the Quick
Shoot™ control on the right hand side of the handle and
move it up or down along the handle. Moving the control
down the handle rotates the discharge chute to the left;
moving the control up the handle rotates the discharge chute
to the right (Figure 22).
To raise or lower the angle of the chute deflector, press the
trigger on the chute deflector and move the chute deflector
up or down (Figure 23).
10
Figure 21
Figure 22