Toro Power Clear 721 QZE Operator's Manual page 18

4. Hold the discharge chute in the straight-ahead position,
pull the lower cable casing downward until you remove
the slack in the cable, and tighten the screw on the
lower cable clamp securely
Figure 43
1. Lower cable casing
5. Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely
Figure 44
1. Upper cable casing
Note: Do not over-tension the cables. If the cables
are over-tensioned, the Quick Shoot will be hard to
operate.
(Figure 43).
(Figure 44).
18