Figure; Safety; Safety And Instructional Decals - Toro Power Clear 721 QZE Operator's Manual

Safety

•
Read and understand the contents of this Operator's Manual
before you start the engine. Ensure that everyone using
this product knows how to use it and understands the
warnings.
•
Do not put your hands or feet near moving components
on the machine.
•
Do not operate the machine without all guards and other
safety protective devices in place and working on the
machine.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
Order Part No. 117-9121
1. Cutting dismemberment hazards, impeller and auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
94-2577
115-5698
•
Keep clear of any discharge opening. Keep bystanders a
safe distance away from the machine.
•
Keep children out of the operating area. Never allow
children to operate the machine.
•
Shut off the engine before unclogging, servicing, or
fueling the machine.
Order Part No. 117-6046
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—shut off
the engine before leaving
the machine.
3. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch on
3
117-9103
6. Engine switch off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
engine-oil level.
10. Plug the machine in to
power the electric starter.