For Integreted Graphics models:
When installing:
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
the parts marked
cause a thermal problem due to imperfect contact with a component. For the fan in the integrated
graphics models, you need to peel the thin film off from the thermal rubber marked
For Discrete Graphics models:
For Integrated Graphics models:
Downloaded from LpManual.com Manuals
a
as in the following figures. Either too much or too less application of grease can
a
b
Chapter 8
b
.
.
Removing and replacing a FRU
103