Collecting Common Log Messages; Collecting Diagnostic Log Messages - HP 6125XLG Installation Manual

Blade switch
Table of Contents

Advertisement

Category
Diagnostic log
Operating
statistics

Collecting common log messages

1.
Save the common log messages from the log buffer to a log file.
By default, the log file is saved in the logfile directory of the flash memory on each member device.
<Sysname> logfile save
The contents in the log file buffer have been saved to the file
flash:/logfile/logfile.log
2.
Identify the log file on each member device:
# Display the log file on the master device.
<Sysname> dir flash:/logfile/
Directory of flash:/logfile
0 -rw-
524288 KB total (107944 KB free)
# Display the log file on each subordinate device:
<Sysname> dir slot2#flash:/logfile/
Directory of slot2#flash:/logfile
0 -rw-
524288 KB total (107944 KB free)
3.
Transfer the files to the desired destination by using FTP or TFTP. (Details not shown.)

Collecting diagnostic log messages

1.
Save the diagnostic log messages from the diagnostic log file buffer to a diagnostic log file.
File name format
Content
Diagnostic log messages about device operation, including the
following items:
diagfile.log
Collecting operating statistics decreases system performances.
Current operation statistics for feature modules, including the
following items:
file-basename.gz
21863 Jul 11 2013 16:00:37
21863 Jul 11 2013 16:00:37
Parameter settings used when an error occurs.
Information about device startup errors.
Handshaking information between member devices when a
communication error occurs.
IMPORTANT:
Device status.
CPU status.
Memory status.
Configuration status.
Software entries.
Hardware entries.
logfile.log
logfile.log
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents