Collecting Operating Statistics - HP 6125XLG Installation Manual

By default, the diagnostic log file is saved in the diagfile directory of the flash memory on each
member device.
<Sysname> diagnostic-logfile save
The contents in the diagnostic log file buffer have been saved to the file
flash:/diagfile/diagfile.log
2. Identify the diagnostic log file on each member device:
# Display the diagnostic log file on the master device.
<Sysname> dir flash:/diagfile/
Directory of flash:/diagfile
0 -rw-
524288 KB total (107944 KB free)
# Display the diagnostic log file on each subordinate device:
<Sysname> dir slot2#flash:/diagfile/
Directory of slot2#flash:/diagfile
0 -rw-
524288 KB total (107944 KB free)
Transfer the files to the desired destination by using FTP or TFTP. (Details not shown.)
#

Collecting operating statistics

You can collect operating statistics by saving the statistics to a file or displaying the statistics on the
screen.
When you collect operating statistics, follow these guidelines:
• Log in to the device through a network port (if any) instead of the console port. Network ports are
faster than the console port.
Do not execute commands during operating statistics collection.
•
To ensure information completeness, HP recommends that you save the statistics to a file.
•
To collect operating statistics:
1. Disable pausing between screens of output if you want to display operating statistics on the screen.
Skip this step if you are saving statistics to a file.
<Sysname> screen-length disable
2. Collect operating statistics for multiple feature modules.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N] :
3. At the prompt, choose to save or display operating statistics:
# To save operating statistics, enter y at the prompt and then specify the destination file path.
Save or display diagnostic information (Y=save, N=display)? [Y/N] :y
Please input the file name(*.tar.gz)[flash:/diag.tar.gz] :flash:/diag.tar.gz
Diagnostic information is outputting to flash:/diag.tar.gz.
Please wait...
Save successfully.
<Sysname> dir flash:/
Directory of flash:
161321 Jul 11 2013 16:16:00
161321 Jul 11 2013 16:16:00
14
diagfile.log
diagfile.log