ADTRAN NetVanta 7100 IP PBX Configuration Manual page 21

Note: The EICL license supports a maximum of nine DCX 8510 chassis connected in a full mesh topology or up Note:
Note: Note:
to twelve DCX 8510 chassis connected in a core-edge topology. Refer to the Brocade SAN Scalability
Guidelines document for additional information.
WAN Rate Upgrade 1 License WAN Rate Upgrade 1 License WAN Rate Upgrade 1 License — The WAN Rate Upgrade 1 license provides the additional WAN throughput up WAN Rate Upgrade 1 License
to 10 Gbps on Brocade 7840. The base configuration of Brocade 7840 without the WAN Rate Upgrade 1
license provides WAN throughput up to 5 Gbps.
WAN Rate Upgrade 2 License — The WAN Rate Upgrade 2 license provides unlimited WAN throughput (other WAN Rate Upgrade 2 License
WAN Rate Upgrade 2 License WAN Rate Upgrade 2 License
than the hardware limit) on Brocade 7840. The WAN Rate Upgrade 2 licenses also enable the use of two
40GbE ports on Brocade 7840. The 40GbE ports cannot be configured without the WAN Rate Upgrade 2
license. A WAN Rate Upgrade 1 license must be installed on a Brocade 7840 before a WAN Rate Upgrade 2
license is installed. A WAN Rate Upgrade 1 license cannot be removed before the WAN Rate Upgrade 2 license
has been removed.
Note: The WAN Rate Upgrade 1 and WAN Rate Upgrade 2 licenses apply only to Brocade 7840. They control Note:
Note: Note:
the aggregate bandwith for all tunnels on a Brocade 7840. The entire capacity controlled by the licenses
can be assigned to a single tunnel subject to hardware limitation, or a portion of the capacity can be
assigned to multiple tunnels. The total bandwidth aggregated for all tunnels should not exceed the limits
established by the licenses.
Fabric OS 7.4.1a Release Notes v3.0 Page 21 of 142