Replacement Parts; Accessories - Generac Power Systems 8 kVA Owner's Manual

General Information

Replacement Parts

Description
26R Exide Battery
Spark Plug
Oil Filter
Air Filter
Control Panel Fuse
Transfer Switch Fuses

Accessories

NOTE: Performance enhancing accessories are available for air-cooled generators. Contact an IASD or visit
www.generac.com for additional information on replacement parts, accessories, and extended warranties. See also
http://www.ordertree.com/generac/air-cooled-homestandby-generators/.
Accessory
Cold Weather Accessories*—
•
Battery Pad Warmer
•
Oil Warmer
•
Breather Warmer
* each sold separately
Scheduled Maintenance Kit
Fascia Base Wrap
Touch-Up Paint Kit
Wireless Local Monitor
8
8 kVA
0E9368
(RL87YC or equivalent)
0E9371A
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
(Not necessary for use with AGM-style batteries)
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
•
Recommended in areas where heavy icing occurs.
Includes all pieces necessary to perform maintenance on the generator along with oil
recommendations.
The fascia base wrap snaps together around the bottom of the new air-cooled generators.
This offers a sleek, contoured appearance as well as offering protection from rodents and
insects by covering the lifting holes located in the base. Requires use of the mounting pad
shipped with the generator.
Very important to maintain the look and integrity of the generator enclosure. This kit includes
touch-up paint and instructions.
The Wireless Local Monitor is completely wireless and battery powered, and provides owners
with instant generator status updates without ever leaving the house. Status lights (red,
yellow, and green) alert owners when the generator needs attention. Magnetic backing
permits refrigerator mounting and gives a 600 ft (183 m) line of sight communication.
10 kVA
0H3421S
0E7585A
(RC14YC4 or equivalent)
070185E
0J8478
0D7178T
073590A
Description
Owner's Manual for 50 Hz Air-Cooled Generators
13 kVA