General Information
Replacement Parts
Description
26R Exide battery
Spark plug
Oil filter
Air filter
Control panel fuse
Rotor brushes
Accessories
NOTE: Performance enhancing accessories are available for air-cooled generators. Contact an IASD or visit
www.generac.com
for additional information on replacement parts, accessories, and extended warranties. See also
http://www.ordertree.com/generac/air-cooled-homestandby-generators/.
Accessory
Cold Weather Accessories*—
•
Battery Pad Warmer
•
Oil Warmer
•
Breather Warmer
* each sold separately.
Scheduled Maintenance Kit
Touch-Up Paint Kit
Wireless Local Monitor
Wi-Fi LP Fuel Level Monitor
Base Plug Kit
12
15 kW EcoGen
0H34215
0G0767A
(RC12YC or equivalent)
070185E
0J8478
0D7178T
0J8415
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
(Not necessary for use with AGM-style batteries)
•
Recommended in areas where temperatures fall below 0 °F (-18 °C).
•
Recommended in areas where heavy icing occurs.
NOTE: Battery heaters and oil heaters require N1 and N2 connections to 240V util-
ity. Breather heater requires T1 connection to 120V.
Provides all items necessary to perform complete routine maintenance on a gener-
ator, along with oil recommendations (oil not included).
Very important to maintain the look and integrity of the generator enclosure. This kit
includes touch-up paint and instructions.
The Wireless Local Monitor is completely wireless and battery powered, and pro-
vides owners with instant generator status updates without ever leaving the house.
Status lights (red, yellow, and green) alert owners when the generator needs atten-
tion. Magnetic backing permits refrigerator mounting and gives a 600 ft (183 m) line
of sight communication.
The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the con-
nected LP fuel tank. Monitoring the LP tank level is an important step in making sure
your generator is ready to run during an unexpected power failure. Status alerts are
available through the Mobile Link™ application informing you when your LP tank
needs a refill.
Base plugs snap into the lifting holes on the base of air-cooled home standby gen-
erators. This offers a sleek, contoured appearance, as well as offers protection from
rodents and insects by covering the lifting holes located in the base. Base plug kit
contains four base plugs, sufficient for use on a single air-cooled home standby
generator.
Description
Owner's Manual for 60 Hz EcoGen™ Generators
Need help?
Do you have a question about the EcoGen 15 kW and is the answer not in the manual?