Hitachi DH 25DL Handling Instructions Manual page 41

3. Anchor setting (rotation + hammering)
Anchor setting adapter (for rotary hammer)
○
Anchor setting adapter (for manual hammer)
○
4. Bolt placing operation with Chemical Anchor. (rotation + hammering)
(
Standard
socket on the
market
5. Demolishing operation (Hammering only)
(Model DH25DAL and DH36DAL only)
○ Bull point (Round type) (SDS-plus shank) ○ Bull point (Square type) (SDS-plus shank)
6. Groove digging and edging (Hammering only)
○ Cold chisel (SDS-plus shank)
(Model DH25DAL and DH36DAL only)
7. Grooving (Hammering only)
Grooving chisel (SDS-plus shank) (Model DH25DAL and DH36DAL only)
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G) and chuck wrench
○
Anchor size
W1/4"
W5/16"
W3/8"
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Special Drill chuck (13VLR) Chuck adapter (G)
screw
Chuck wrench
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
Anchor setting adapter
(for manual hammer)
(SDS plus shank)
○ Cutter (SDS-plus shank)
(Model DH25DAL and DH36DAL only)
(SDS plus shank)
41
English