Symbol; Specifications - Hitachi DH 25DL Handling Instructions Manual

English
WARNING
If an electrically conductive foreign object enters the terminals of the lithium ion battery,
a short-circuit may occur resulting in the risk of fi re. Please observe the following
matters when storing the battery.
Do not place electrically conductive
○
cuttings, nails, steel wire, copper wire
or other wire in the storage case.
Either install the battery in the power
○
tool or store by securely pressing into
the battery cover until the ventilation
holes are concealed to prevent short-
circuits (See Fig. 1).

SYMBOL

WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
Read all safety warnings and all instructions.

SPECIFICATIONS

POWER TOOL
Model
No-load speed Save/Power
Full-load impact rate Save/Power
Drilling
Capacity
Driving
Battery
Weight
Do not use the "SAVE" mode when boring holes with the wood drill. There is a likelihood
○
that the motor will burn out.
CHARGER
Model
Charging voltage
Weight
DH25DL
Concrete
Steel
Wood
Wood
screw
BSL2530: Li-ion 25.2 V
(3.0 Ah 14 cells)
3.5 kg
Ventilation holes
Latch
Push
DH25DAL
0 – 550 /min / 0 – 1100 /min
0 – 2250 /min / 0 – 4500 /min
26 mm
13 mm
30 mm
6.2 mm (diameter) × 40 mm (length)
3.6 kg
UC36YRL
25.2 V 36 V
0.9 kg
38
Terminals
Guide rail of batery
Battery cover
Battery
Fig. 1
DH36DL DH36DAL
BSL3626: Li-ion 36 V
(2.6 Ah 20 cells)
3.9 kg 4.0 kg