Saving Our Work; Start-Up Mode - Sony MVS -8000X Quick Setup Manual

Saving Our Work

Now that we've gone to all this trouble to set up and program a small part of the switcher, we need to
do a couple more things. First, we need to save what we've done to non-volatile memory and tell the
switcher to come up this way every time.

Start-Up Mode

Please jump to menu page 7314 (ENG SETUP->SYSTEM->STARTUP). This is the menu that we will tell
the switcher how we want it to boot.
At the top list box, please select PNL1. Below, please set the Start Up Mode group to "Custom". This
tells the switcher to boot with the selection in the "Setup" group directly below. Next, set the Setup
group to "User". This tells the switcher to boot from the stored flash memory of settings rather than the
factory setting. If we left this in factory mode, next time you powered up the switcher, all our settings
would be lost! For now, let's just leave the Initial Status group to Factory. This will get changed by your
operations trainer.
You need to repeat these same procedures for SWR1 (by selecting it in the top list). Set SWR1 to
Custom Start-Up mode and User Setup mode.
Next, select DME1 and do the same things as above. Finally, press the EXECTUE button to make the
system accept these changes.
pg. 72