System Config - Sony MVS -8000X Quick Setup Manual

System Config

Now that we've told MVS what it's supposed to be looking for, let's continue to make sure all the parts
of the system will talk correctly. Please go to menu page 7312. This takes us to ENG SETUP->SYSTEM-
>SYSTEM CONFIG. Look at the top of the table.
You will see PNL1 on the left column. Column 2 should say SWR1, meaning that PNL1 is going to be
controlling SWR1. It is highly unlikely you will have two switcher chassis being controlled by a single
panel, which would show up under Column 3 as SWR2. We're going to ignore the other columns for
now as these will be checked by our Field Service Engineer during your Install Check-Out.
pg. 42