65KV
Chapter 1: Introduction
1-1 CPU
• Supports Intel
• Supports Intel
~ 750 MHz or higher.
• Supports Cyrix Joshua PR400/ PR450/ PR500 CPUs.
• Supports CPU voltage Auto-Detect circuit.
1-2 CHIPSET
• VIA 694X chipset (North Bridge) and VIA 686A chipset (South Bridge).
• Supports two 32-bit 3.3V/5V system bus. (one is AGP and the other is
PCI)
• Supports 66/100/133MHz CPU external bus speed.
• AGP 3.3V 1x/2x mode, AGP 1.5V 4x mode and PCI 2.1 compliant.
• Concurrent CPU and AGP access.
• Pipelined transfers up to 533MB/sec.
• Windows 95 OSR2 VxD and integrated Windows 98 / Windows 2000
miniport driver support.
• Ultra ATA33/66 Master Mode PCI EIDE controller.
• USB (Universal Serial Bus) connector.
• Sophisticated PC98-compatible Mobile Power Management.
1-3 L2 CACHE
• Intel
®
Celeron™ CPU supports 128K write back cache with Pipelined
Burst SDRAMs.
®
• Intel
Pentium !!!
with Pipelined Burst SDRAMs.
1-4 MAIN MEMORY
• Supports total memory from 8MB to 768MB (SDRAM).
• Supports 3pcs 168pin DIMM sockets. ( 3.3V Unbuffered and 4 Clock
type)
• Supports SDRAM with 12ns/10ns/8ns speed.
4
®
PPGA Celeron™ 370 CPUs at 233MHz ~ 700MHz.
®
FC-PGA Pentium !!!
®
Coppermine supports 256K/ 512K write back cache
®
Coppermine CPUs using at 500E
Need help?
Do you have a question about the 65kv and is the answer not in the manual?