JVC BD-X200E Instructions Manual page 38

Hide thumbs Also See for BD-X200E:

Table of Contents

Available languages

Settings & Controls for Recording

Setting the Encoding Format for Audio & Video (continued)

Audio Encoding

AUDIO ENCODE

This parameter is used to set the encoding format for audio data.

: Linear PCM encoding

DOLBY DIGITAL : Dolby AC3 encoding.

: MPEG encoding.

● If the SET UP button is pressed while in Recording mode, the video bit-rate setting and audio encoding format will be

displayed on-screen. Press the SET UP button once again to hide this information.

● When recording a music source it is recommended that the setting is either DOLBY DIGITAL or LPCM.

For MPEG, there can be deterioration in the sound quality, depending upon the compression characteristics.

Guide to Recording Times

The time available for recording on a disc will depend on the video encoding bit rate and audio encoding format that have been set.

Furthermore, the more titles a disc contains, the less time will be available for recording. Use the following table as a guide to the

amount of time available for recording.

Audio encoding format

DOLBY DIGITAL

Encoding bit rate

Chapters

Table of Contents