IOGear GCS1782G Installation Manual page 39

For the DVI computers:
Simply follow the instruction of the Installation Section.
For the VGA computers:
3. Connect each of your VGA video output with a VGA Male to Male cable.
4. Connect the other side of the VGA cable to the VGA connection on the DVI-A Male to VGA .
Female Adapter.
5. Connect the DVI-A connection to the CPU DVI port of the KVM.
6. Then use the provided DVI-D KVM cable for USB, audio and mic. connection ONLY.
For the Console DVI Port
Connect the DVI-I cable from the Console DVI port to the monitor.
39