IOGear GCS1782G Installation Manual page 24

Mouse 1. Invoke HSM
Port-switching 2. Press [W]
Keyboard 1. Invoke HSM
Emulation Control 2. Press [N]
Firmware 1. Invoke HSM
Upgrade Mode 2. Key in: upgrade
3. Press [Enter] The
orange front panel
LEDs flash to
indicate Firmware
The Mouse Port-switching function can be enabled or
disabled. The default setting is disabled.
Note: This feature only supports the USB 3-key scroll wheel
mice. The default setting is OFF. This feature is only sup-
ported when mouse emulation is also enabled. See Mouse
Emulation Control, above.
Console keyboard port emulation/bypass feature supports
most gaming/multimedia keyboards. The default setting is
enabled. Disabling allows the special keyboard commands
to pass through the KVM to the computer.
Note: When keyboard emulation is disabled, the following
Hotkeys are disabled. [M], [W], [F2], [F3], [F4], [F5], [F6],
and [F10] See page 28, for details.
Upgrade Mode is in effect.
24